SLAYER · WALNUT CREEK
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Walnut Creek, CA
Slayer espresso repair in Walnut Creek, busy downtown coverage
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Walnut Creek
Slayer coffee equipment in Walnut Creek.
Walnut Creek's downtown is one of the busiest coffee scenes in the East Bay, from the cafes off Locust to the office towers nearby. We keep the Slayers in it running.
We service Slayer Espresso and Steam machines throughout Walnut Creek. Independent shop, fast on outages, upfront about parts and timing.
Common repairs we do
What we close on the truck.
- Needle valve service. High-volume bars wear the needle valve seat fast. We reseat or replace it and reset the pre-brew flow.
- Pump and pressure. No pressure or a bouncing gauge during rush. We diagnose the pump and check valves and fix the source.
- Scale and water damage. Hard water plus heavy use scales the tight passages. We descale and review your filtration.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Walnut Creek, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Blackhawk
- Slayer in Concord
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Altos
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Palo Alto
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Walnut Creek questions, answered.
-
Do you pick up machines in Walnut Creek?
Yes. We pick up the machine in Walnut Creek, diagnose it on the bench, and return it. Pickup and return are included in the deposit. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
Do you service office-building espresso in Walnut Creek?
Yes, lobby and floor cafes in the towers are part of our regular work. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Walnut Creek?