SLAYER · SAN CARLOS
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · San Carlos, CA
Slayer espresso repair for San Carlos restaurants on Laurel Street
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in San Carlos
Slayer coffee equipment in San Carlos.
Laurel Street runs restaurant after restaurant, and more than a few of them lean on a Slayer to hold shot quality through two rushes a day. On the industrial side east of the tracks, roasters and commissary kitchens run Slayer Steam units on longer, steadier cycles instead of a quick lunch rush.
We service Slayer Espresso and Slayer Steam machines across San Carlos. Independent shop, and our Peninsula technician covers San Carlos directly instead of driving over from San Ramon.
Common repairs we do
What we close on the truck.
- Pre-infusion ramp drifting mid-shift. A busy Laurel Street bar wears the needle valve in faster than a slower cafe would. When the pour speeds up partway through service, I service the valve and reset the flow rather than replace it on a guess.
- Steam boiler recovery slowing down. Commissary kitchens on the east side run steam most of the day, and slow recovery usually shows up before an outright failure. I check the element and the boiler thermostat before the machine actually quits mid-order.
- Pump pressure dropping under volume. High-cycle restaurant use pushes a pump harder than a boutique account would. When the gauge bounces or pressure fades, I check the pump and the check valves before quoting a full pump replacement.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in San Carlos, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Altos
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Palo Alto
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in San Carlos questions, answered.
-
Do you cover the industrial side of San Carlos, not just Laurel Street?
Yes. Roasters and commissary kitchens east of the tracks get the same service as a restaurant on Laurel Street. -
How long does service take?
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in San Carlos?