SLAYER · MENLO PARK
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Menlo Park, CA
Slayer repair for Menlo Park's specialty coffee bars
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Menlo Park
Slayer coffee equipment in Menlo Park.
We include pickup in Menlo Park, bench diagnosis, and return. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
We service Slayer as an independent shop. It's a manual-focused, mechanically precise machine, and we treat it that way, no shortcuts, no generic parts swapped in without checking why the original failed.
No factory certification here, just a technician who understands what makes a Slayer different from a standard two-group and repairs it accordingly.
Common repairs we do
What we close on the truck.
- Pre-infusion valve service. Slayer's signature pre-infusion control depends on a needle valve staying clean and precise. We service and recalibrate it.
- Group gasket and seal replacement. Leaks and inconsistent pressure usually mean worn seals. We rebuild the group to spec, not just patch the symptom.
- Boiler and PID calibration. Temperature drift gets traced to the PID or heating element and corrected, not just reset.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Menlo Park, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Gatos
- Slayer in Millbrae
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Menlo Park questions, answered.
-
Are you Slayer certified?
No, we service Slayer as an independent shop without manufacturer authorization. We know the machine well and diagnose it carefully. -
How does Slayer pickup work in Menlo Park?
We pick up the machine in Menlo Park, diagnose it on the bench, and return it. Pickup and return are included in the deposit, which is not credited toward repair. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Menlo Park?