SLAYER · MILLBRAE
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Millbrae, CA
Slayer espresso repair for Millbrae's specialty coffee shops
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Millbrae
Slayer coffee equipment in Millbrae.
There's a specialty coffee shop or two near the Millbrae BART and Caltrain station built around a Slayer, aimed straight at commuters who want something better than the boba-and-coffee spots down the street.
We service Slayer Espresso and Slayer Steam machines in Millbrae. We're independent, not a factory dealer, and we tell you straight what a repair takes.
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Common repairs we do
What we close on the truck.
- Pre-brew flow gone inconsistent. The slow-flow pre-infusion you bought the Slayer for starts drifting. We service the needle valve and actuator to bring it back.
- Pressure profiling problems. Shots ramp wrong or the pressure won't build. We check the pump, valves, and group seals rather than swapping parts blind.
- Scale damage from hard water. Millbrae water leaves scale in tight passages. We descale properly and check the filtration feeding your machine.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Millbrae, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Cupertino
- Slayer in Los Altos
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Palo Alto
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Millbrae questions, answered.
-
Are you a Slayer authorized dealer?
No. We're an independent service company. We service Slayer Espresso and Slayer Steam machines, we don't sell them, and we won't claim a factory relationship we don't have. -
Do you pick up machines in Millbrae?
Yes. We pick up the machine in Millbrae, diagnose it on the bench, and return it. Pickup and return are included in the deposit. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Millbrae?