SLAYER · SAN BRUNO
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · San Bruno, CA
Slayer espresso repair in San Bruno
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in San Bruno
Slayer coffee equipment in San Bruno.
San Bruno sits right under the SFO flight path, and a lot of the commercial buildings near the airport and along El Camino Real date back to the 1940s and 60s. Older wiring in those buildings doesn't always deliver clean power, and a Slayer's electronics notice.
We service Slayer Espresso and Slayer Steam machines in San Bruno, including hotel and airport-area coffee programs. Independent shop, and I check the building's power before I blame the machine.
Common repairs we do
What we close on the truck.
- Voltage-related electronic faults. Older buildings sometimes deliver voltage on the low side or with more noise than a Slayer's board expects. I check incoming power with a meter before chasing the machine for a fault it doesn't have.
- Needle valve and pre-brew problems. When the pre-infusion stops holding its slow ramp, the needle valve is usually the cause. I service it and confirm the flow profile is back where it should be.
- Scale in the boiler and lines. Peninsula water runs harder in some pockets than people expect. I descale the boiler and lines and check what filtration is actually installed.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in San Bruno, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Altos
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Palo Alto
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in San Bruno questions, answered.
-
Do you service airport-area hotels and conference spaces?
Yes, we work on Slayer machines in hospitality settings near SFO. -
How does Slayer pickup work in San Bruno?
We pick up the machine in San Bruno, diagnose it on the bench, and return it. Pickup and return are included in the deposit, which is not credited toward repair. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
Are you Slayer-authorized?
No. We're an independent repair company. We service Slayer equipment without claiming factory authorization. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in San Bruno?