SLAYER · CUPERTINO
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Cupertino, CA
Slayer repair for the specialty cafes running one
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Cupertino
Slayer coffee equipment in Cupertino.
Slayer isn't common in Cupertino, but the handful of cafes chasing a real specialty pour tend to have one, built around a needle-valve pre-infusion system that most machines don't even attempt.
That's a specific system, and we service it as an independent shop with the patience it deserves. Get the pre-infusion timing wrong and the whole point of the machine is gone.
No factory relationship here. Just careful work on a machine that a lot of shops wouldn't touch.
Common repairs we do
What we close on the truck.
- Needle valve pre-infusion service. When pre-infusion timing drifts, shots lose the profile you dialed in. We service the needle valve system and get it back on spec.
- Group head and gasket rebuild. Standard wear items, gaskets and screens, replaced without disturbing the pre-infusion calibration.
- Boiler and PID check. Temperature stability issues get traced to the controller or element, same as any high-end machine, just handled with the extra care Slayer needs.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Cupertino, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Hillsborough
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Palo Alto
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Cupertino questions, answered.
-
Have you serviced Slayer machines before?
Yes, though it's a less common call. We're an independent shop with no Slayer certification, we just know the platform and treat the pre-infusion system with the care it needs. -
Do you pick up machines in Cupertino?
Yes. We pick up the machine in Cupertino, diagnose it on the bench, and return it. Pickup and return are included in the deposit. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Cupertino?