SLAYER · DUBLIN
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Dublin, CA
Slayer pickup and bench repair in Dublin
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Dublin
Slayer coffee equipment in Dublin.
Dublin's cafes and the espresso bars tucked into the office parks off Dublin Boulevard run on machines that can't afford a slow morning. When a Slayer goes down, we get out to you quick.
We service Slayer espresso machines in Dublin for cafes, restaurants, and workplace coffee programs. Independent shop, honest about what we can and can't promise on parts.
Common repairs we do
What we close on the truck.
- Needle valve and paddle issues. The pre-brew flow goes inconsistent or the paddle sticks. We clean, reseat, or replace the needle valve assembly and reset the flow so your shots line up again.
- Brew pressure won't hold. Bouncing gauge, wild shot times, no pressure build. Usually the pump or a worn check or group seal. We find the actual cause.
- Steam and hot water faults. Weak steam, a dribbling wand, or no hot water. Often steam valves or a scaled element. We isolate the boiler at fault first.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Dublin, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Altos
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Palo Alto
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Dublin questions, answered.
-
How long does service take?
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
Are you a Slayer authorized dealer?
No. We're an independent service company that repairs Slayer machines. We don't claim factory authorization. We just fix them well. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Dublin?