SLAYER · LOS GATOS
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Los Gatos, CA
Slayer repair for Los Gatos's specialty coffee bars
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Los Gatos
Slayer coffee equipment in Los Gatos.
Slayer belongs to the specialty end of the market, and Los Gatos has enough of that crowd downtown that a Slayer or two has found its way onto a bar. These machines are built for control, which also means more that can drift out of adjustment.
We service Slayer equipment as an independent shop, no factory relationship, just careful, correct diagnosis on a machine that deserves it.
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Common repairs we do
What we close on the truck.
- Pre-infusion valve service. The needle valve that controls Slayer's signature pre-infusion wears and drifts. We service or replace it so the flow profile comes back to spec.
- Group gasket and screen. Same wear pattern as any high-volume espresso machine, worn gaskets and screens cause leaks and uneven extraction.
- Boiler and PID calibration. Temperature stability depends on a well-calibrated PID. We check the whole loop before assuming a part has failed.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Los Gatos, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Hillsborough
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Palo Alto
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Mountain View
- Slayer in Sunnyvale
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Los Gatos questions, answered.
-
Are you Slayer authorized?
No, we're an independent service company. No factory authorization, just experience on the equipment. -
Do you pick up machines in Los Gatos?
Yes. We pick up the machine in Los Gatos, diagnose it on the bench, and return it. Pickup and return are included in the deposit. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Los Gatos?