SLAYER · MOUNTAIN VIEW
Service · All Slayer ModelsSlayer Commercial Coffee & Espresso Machine Repair · Mountain View, CA
Slayer machines in Mountain View's specialty cafes
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Slayer in Mountain View
Slayer coffee equipment in Mountain View.
You won't find a Slayer in a Google break room, but a couple of the independent spots on Castro Street have one, built around a needle-valve pre-infusion system that most equipment never bothers with.
That valve is the whole point of the machine, and we take the time to service it properly as an independent shop. Rush the pre-infusion timing and you've got an expensive machine acting like a cheap one.
There's no factory relationship here, just a willingness to work carefully on something most general repair shops would rather pass on.
Common repairs we do
What we close on the truck.
- Needle valve pre-infusion service. Once the pre-infusion timing drifts, a Castro Street cafe's dialed-in shot profile is gone, so we rebuild the needle valve system back to spec.
- Group head and gasket rebuild. Gaskets and screens wear the same way they do on any commercial group head, and we swap them without touching the pre-infusion calibration.
- Boiler and PID check. If temperature starts drifting, we check the controller and heating element first, the same diagnostic order as any high-end machine, just done with extra patience here.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Mountain View, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Slayer product lines.
- Slayer Espresso Single Group
- Slayer Espresso 2 Group
- Slayer Espresso 3 Group
- Slayer Steam EP
- Slayer Steam LP
- Slayer Steam X
- Slayer V3
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Slayer service in neighboring cities.
More cities
Slayer across our service area.
- Slayer in Dublin
- Slayer in Pleasanton
- Slayer in Livermore
- Slayer in San Ramon
- Slayer in Danville
- Slayer in Alamo
- Slayer in Blackhawk
- Slayer in Walnut Creek
- Slayer in Concord
- Slayer in Lafayette
- Slayer in Orinda
- Slayer in Moraga
- Slayer in Pleasant Hill
- Slayer in Martinez
- Slayer in Oakland
- Slayer in Berkeley
- Slayer in Fremont
- Slayer in Hayward
- Slayer in Castro Valley
- Slayer in Atherton
- Slayer in Burlingame
- Slayer in Cupertino
- Slayer in Hillsborough
- Slayer in Los Gatos
- Slayer in Menlo Park
- Slayer in Millbrae
- Slayer in Saratoga
- Slayer in Albany
- Slayer in El Cerrito
- Slayer in Santa Clara
- Slayer in San Jose
- Slayer in Daly City
- Slayer in South San Francisco
- Slayer in San Bruno
- Slayer in Pacifica
- Slayer in San Mateo
- Slayer in Foster City
- Slayer in Belmont
- Slayer in San Carlos
- Slayer in Redwood City
- Slayer in East Palo Alto
- Slayer in Half Moon Bay
- Slayer in Woodside
- Slayer in Portola Valley
- Slayer in Los Altos Hills
- Slayer in Alameda
- Slayer in Milpitas
- Slayer in Newark
- Slayer in Piedmont
- Slayer in Richmond
- Slayer in San Leandro
- Slayer in Union City
FAQ
Slayer in Mountain View questions, answered.
-
Have you worked on this brand before?
It's not a common call in Mountain View, but yes. No Slayer certification behind us, just familiarity with the platform and respect for the pre-infusion system. -
How does Slayer pickup work in Mountain View?
We pick up the machine in Mountain View, diagnose it on the bench, and return it. Pickup and return are included in the deposit, which is not credited toward repair. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Slayer service in Mountain View?