FAEMA · SAN BRUNO
Service · All Faema ModelsFaema Commercial Coffee & Espresso Machine Repair · San Bruno, CA
Faema Emblema and Compact S service for San Bruno's Tanforan area cafes and offices near SFO.
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Faema in San Bruno
Faema coffee equipment in San Bruno.
San Bruno sits right under the SFO flight path, and the commercial strip around Tanforan and El Camino keeps a handful of Faema units going for offices and cafes serving airport-adjacent business. We cover 94066.
A lot of San Bruno's commercial buildings started as 1940s and 60s construction before being subdivided for retail, and some electrical systems were not built with a commercial espresso machine in mind. Building electrical work is outside our bench-repair scope.
Common repairs we do
What we close on the truck.
- Electrical and circuit check on older buildings. A 1950s storefront rewired for retail sometimes can't hold a dedicated 20 amp line for the machine. I test the circuit first so a board doesn't fail again from a bad supply.
- Group gasket and portafilter seal. Drips at the group and channeling in the cup. We replace the gasket and reset the seal so extraction stays consistent.
- Control board diagnosis on Emblema. Lost dosing or a dead panel on a unit serving an office lobby. We test against the fault instead of guessing at a board swap.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in San Bruno, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Faema product lines.
- E71
- E61 Legend
- E61 Jubile
- Teorema
- Emblema
- President GTi
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Faema service in neighboring cities.
More cities
Faema across our service area.
- Faema in Dublin
- Faema in Pleasanton
- Faema in Livermore
- Faema in San Ramon
- Faema in Danville
- Faema in Alamo
- Faema in Blackhawk
- Faema in Walnut Creek
- Faema in Concord
- Faema in Lafayette
- Faema in Orinda
- Faema in Moraga
- Faema in Pleasant Hill
- Faema in Martinez
- Faema in Oakland
- Faema in Berkeley
- Faema in Fremont
- Faema in Hayward
- Faema in Castro Valley
- Faema in Atherton
- Faema in Burlingame
- Faema in Cupertino
- Faema in Hillsborough
- Faema in Los Altos
- Faema in Los Gatos
- Faema in Menlo Park
- Faema in Palo Alto
- Faema in Saratoga
- Faema in Albany
- Faema in El Cerrito
- Faema in Mountain View
- Faema in Sunnyvale
- Faema in Santa Clara
- Faema in San Jose
- Faema in Daly City
- Faema in San Mateo
- Faema in Foster City
- Faema in Belmont
- Faema in San Carlos
- Faema in Redwood City
- Faema in East Palo Alto
- Faema in Half Moon Bay
- Faema in Woodside
- Faema in Portola Valley
- Faema in Los Altos Hills
- Faema in Alameda
- Faema in Milpitas
- Faema in Newark
- Faema in Piedmont
- Faema in Richmond
- Faema in San Leandro
- Faema in Union City
FAQ
Faema in San Bruno questions, answered.
-
How does Faema pickup work in San Bruno?
We pick up the machine in San Bruno, diagnose it on the bench, and return it. Pickup and return are included in the deposit, which is not credited toward repair. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
Can you check if our building's wiring can even run this machine?
Yes, we test voltage and circuit before doing repair work, especially in older San Bruno storefronts that were built for something other than a commercial machine. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Faema service in San Bruno?