FAEMA · DUBLIN
Service · All Faema ModelsFaema Commercial Coffee & Espresso Machine Repair · Dublin, CA
Faema E71 and Teorema repair for Dublin cafes, office bars, and the dining-corridor crowd off Dublin Boulevard.
- $150 pickup + bench deposit
- Diagnostics can take up to a week
- CSLB #1136642
Faema in Dublin
Faema coffee equipment in Dublin.
Dublin runs on volume. The cafes near the BART stop and the office buildings along Dublin Boulevard push a Faema hard from the morning rush straight through lunch, and that pace is exactly when a tired group or a scaled boiler picks to fail. We cover all of 94568, including the newer build-out east toward Fallon.
Most of what we see here is heat-cycle wear: hardened E61 group gaskets, a steam solenoid that won't shut clean, or scale finally taking out a heating element. We carry the common Faema service parts and quote you before we open anything.
Common repairs we do
What we close on the truck.
- E61 group gasket and seal rebuild. Channeling, a soft drip at the portafilter, weak extraction. We pull the group, replace gaskets and seals, and reset extraction pressure so your shots come back consistent.
- Steam and brew solenoid replacement. Machine won't cut water cleanly or stops steaming during the rush. We test the solenoid coils and valve seats and swap what's actually failed.
- Boiler descale and element replacement. Slow heat recovery, short-cycling, or a dead element after scale buildup. We descale the boiler or heat exchanger and replace a burned element on Dublin's hard water.
Honest repair timing
A repair queue is easier to avoid than to rush.
We pick up the machine in Dublin, diagnose it on the bench, and return it. Pickup and return are included, and you get the repair quote after diagnosis.
Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance. A maintained machine does not sit in a repair queue for a month.
- Pickup and return included
- Diagnostics: up to one week
- Most repairs: 3–4 weeks
Models we service
Faema product lines.
- E71
- E61 Legend
- E61 Jubile
- Teorema
- Emblema
- President GTi
Pickup, bench time, and warranty
What it costs. What we stand behind.
-
$150
Pickup, bench diagnosis, and return. Not credited toward repair.
-
$150/hour
Bench time beyond the deposit. Repair is quoted after diagnosis.
-
6 months
6 months on parts and 90 days on consumables. Diagnostics can take up to a week; most repairs run 3–4 weeks.
Nearby cities
Faema service in neighboring cities.
More cities
Faema across our service area.
- Faema in Danville
- Faema in Alamo
- Faema in Blackhawk
- Faema in Walnut Creek
- Faema in Concord
- Faema in Lafayette
- Faema in Orinda
- Faema in Moraga
- Faema in Pleasant Hill
- Faema in Martinez
- Faema in Oakland
- Faema in Berkeley
- Faema in Fremont
- Faema in Hayward
- Faema in Castro Valley
- Faema in Atherton
- Faema in Burlingame
- Faema in Cupertino
- Faema in Hillsborough
- Faema in Los Altos
- Faema in Los Gatos
- Faema in Menlo Park
- Faema in Millbrae
- Faema in Palo Alto
- Faema in Saratoga
- Faema in Albany
- Faema in El Cerrito
- Faema in Mountain View
- Faema in Sunnyvale
- Faema in Santa Clara
- Faema in San Jose
- Faema in Daly City
- Faema in South San Francisco
- Faema in San Bruno
- Faema in Pacifica
- Faema in San Mateo
- Faema in Foster City
- Faema in Belmont
- Faema in San Carlos
- Faema in Redwood City
- Faema in East Palo Alto
- Faema in Half Moon Bay
- Faema in Woodside
- Faema in Portola Valley
- Faema in Los Altos Hills
- Faema in Alameda
- Faema in Milpitas
- Faema in Newark
- Faema in Piedmont
- Faema in Richmond
- Faema in San Leandro
- Faema in Union City
FAQ
Faema in Dublin questions, answered.
-
How does Faema pickup work in Dublin?
We pick up the machine in Dublin, diagnose it on the bench, and return it. Pickup and return are included in the deposit, which is not credited toward repair. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month. -
Do you work on the electronic Teorema and Emblema?
Yes. We test the control board against the actual fault and check pump and dosing instead of guessing at the panel. -
Are you the Faema factory dealer?
No. We're an independent licensed service company. We service Faema, we just don't claim factory authorization for it. -
What does pickup and bench diagnosis cost?
The $150 deposit includes pickup, bench diagnosis, and return and is not credited toward repair. Extra bench time is $150 per hour. Diagnostics can take up to a week; most repairs run 3–4 weeks. That is exactly why we recommend preventive maintenance: a maintained machine does not sit in a repair queue for a month.
Need Faema service in Dublin?